Neenah Coldenhove 3G JET-OPAQUE Heat Transfer Paper, 11" x 17" (10 Sheet)

<b>3G JET-OPAQUE HEAT TRANSFER PAPER</b> Product #9838P0<br><br>Designed for transferring inkjet images to dark or other colored garments and substrates. This product contains and opaque layer allowing for photograph quality images to be transferred. This product best used for images that contain white to be transferred onto dark garments.<br><br><b>COMMERCIAL PRESS INSTRUCTIONS</b><br><u>PRINTING INSTRUCTIONS:</u><br>1. Print image on coated side of paper right reading (do not mirror the image).<br>2. Trim away the unprinted areas of the transfer.<br><u>PRE-TRANSFERRING INSTRUCTIONS: </u><br>1. Prepare the substrate by ensuring the surface is clean, dry and wrinkle free.<br><u>TRANSFERRING INSTRUCTIONS:</u><br>1. Remove the backing paper from the printed image.<br>2. Place the Heat Transfer Paper on top of the garment with the image facing up (right reading to you).<br>3. Completely cover the image with an ironing sheet.<br>4. Place a piece of spare material over the ironing sheet.<br>5. Press: 30 seconds at 350?F using medium pressure.<br>6. Once cold peel away ironing sheet in a smooth even motion.<br><br>Hand iron instructions included

• 11" X 17" 3G Jet Opaque INK JET Transfer Paper.
• 3G JET-OPAQUE Heat Transfer Papers produce soft, supple yet vibrant and wash-durable ink-jet printed transfers onto dark colored cotton, cotton/poly blends and 100% poly fabrics. The products can be used to apply photographs or other designs and can be trimmed, or plot cut to reduce the transfer of the polymer background. The products can be applied by either a commercial press or a hand iron. Both products are offered to maximize your choices: 3G JET-OPAQUE Papers provide a softer hand.
• Requires Silicone Matte or Gloss Finishing Sheets sold separately. Single step transfer paper for making ink-jet transfers on dark colored fabrics. This product is compatible with most dye, pigment, solvent, and eco-solvent ink-jet printers. Recommended for 100% cotton fabrics only. DO NOT USE with any synthetic fabric material. 3G JET-OPAQUE should be applied with a commercial heat press and can be trimmed with a plot or vinyl cutter. Performing a test cut is recommended.