Charleston Cast Stone Outdoor Fountain in Basin | Large Fountain

Details

Specifications

• Dimensions:  104"L x 104"W x 86"H **Shipping Notice** - the fiberglass basin ships on a pallet which usually fits on a lift gate. However, in the event it doesn't fit, you may need to remove the basin from the pallet while it is on the truck, or plan to have a forklift on site. 
• Base: 102"W
• Weight: 3429 lbs.
• Weight With Water: 5435 lbs.
• Water Volume: 240 Gallons
• Shown in Alpine Stone (AS)
• Sound Type: Cascading
• Splash Level: Moderate splash
• Sound Level: Can be heard from a distance even with moderate traffic
• Drainage Info: One drainage hole in the side wall of the fiberglass basin and one off-center in the large bowl of the fountain
• Fiber reinforced cast stone concrete construction
• Proudly designed and manufactured in the United States 
• No plumbing is needed; water recirculates within the fountain
• Plugs into any standard 3-prong 110 V electrical outlet
• An outdoor-rated extension cord can be used to lengthen the cord

Includes

• Wide choice of color options
• Comes with an optional fountain cover (does not cover basin)
• Recirculating electric pump included
• All hardware and tubing required to properly assemble the fountain
• Full step by step directions

Due to the nature of concrete there is very little that can go wrong with it as long as it's properly cared for. For this reason Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them.

Description

The Charleston Outdoor Fountain in Basin is a standout work of art. It has a beautiful pineapple-shaped finial, two ornate tiers, and a wide basin at the bottom. This large concrete fountain is a majestic focal point for any outdoor space.

To keep a constant water level in your fountain, you can add the auto refill system. It comes with a float valve, concrete base, custom stopper, clear tubing, and a pressure relief garden hose or spigot connection. The device is connected to a garden hose or spigot, and the water is turned on and off by the valve in the unit, keeping your fountain filled effortlessly.

NOTE: The finishes are designed to replicate the look of natural aging, but unlike a painted finish, the patinas do not prevent the natural aging process. Any cast stone item with a patina finish will weather naturally in an outdoor environment. Because each patina is hand applied in a multi-step process and the product is photographed in natural settings, actual colors may vary.

Winter Care

It is very important for you to protect your cast stone and pottery fountains, birdbaths, planters and statuary from the freeze-thaw cycle during the winter months. Ideally, cast stone and pottery decor that can collect water, should not be left outside when temperatures dip down to freezing. They should be stored indoors or in a dry protected place such as a covered porch or garage that is away from the elements. This is not always possible, so it is recommended that you completely dry out your decor and add a waterproof cover. This is because any cast stone or pottery component that can hold water and freeze has the potential to crack and crumble. Components such as fountain pedestals which remain in a basin/pool can also crack or crumble.

For more information on winterizing your cast stone fountain and birdbath, click here.

For more information on winterizing your cast stone planters and statuary, click here.

Fore more information on winterizing your glazed and terra cotta pottery, click here.